Steel plate emulsion coating, FUJI FMR-40 coating emulsion for
clichés / steel plates
Introduction of FUJI photosensitive emulsion coating
FUJI photosensitive emulsion is an important auxiliary in pad
printing. It is used for coating pad printing thick clichés/plates
and thin clichés/plates.
You can coat by hand or by machine. Before using, please agitation
it and open carefully. Use in a well-ventilated area. Avoid
breathing mist or vapor, and contact with eyes, skin, or clothing.
Upon contact with eyes or skin, flush with large amount of water
for at least 15 minutes. If swallowed, immediately drink water to
dilute, call a physician.
Coating by hand:
Put a few drops of some emulsion onto pad plate and whirl, make
sure it is even on the surface of the plate /cliché, the pad plate
and make emulsion cover the surface of pad plate.
The emulsion should be storage in a cool, dry and well-ventilated
area away from all sources of ignition. The expiry date will be
after two years.